How To Unlock A Lock If You Forgot The Combination

via

How do you open a combination lock if you forgot the code?

Pull up gently on the shackle and hold it in place. Turn the dial clockwise listening carefully until you hear the lock click. Start with a good deal of pressure and gently let up as you spin it around, until you meet resistance in only one place. If the dial catches every few numbers, you are pulling too hard. via

How do you unlock a 3 digit combination lock? (video)

How do you reset a 4 digit combination lock if you forgot the code? (video)

How do you unlock a combination lock? (video)

How do you open a Samsonite lock without the code?

Start by pulling up on the dial and turning it clockwise until you hear the lock click. Check what number you're at, add 5 to that number. Write that number down. Set the dial to that number and turn it counterclockwise until you hear it click again. via

How do you change the combination on a 4 digit lock?

To set a combination lock, place the dial at 0 to begin. Use the reset tool that came with the combination lock and push it into the hole on the side of the lock chamber. Turn it 90 degrees in either direction. Set the wheels at the combination you've chosen. via

How do you reset a 4 digit lock?

  • Pull up the shackle to open the lock.
  • Rotate the shackle 90° counterclockwise and press all the way down.
  • Hold down the shackle and set your own combination by turning dials.
  • Turn the shackle back as normal. The setting is now complete.
  • via

    How do you open a 4 Number Lock?

  • Find your combination.
  • Go to the first number.
  • Set the second dial on the lock to the second number in the combination.
  • Use the third wheel to find the third number in the combination.
  • Locate the fourth number in the combination on the bottom wheel on the lock and center it.
  • via

    How do you unlock a lock with a bobby pin? (video)

    How do you unlock a Samsonite lock?

    STEP 1: Turn the number dials to the previously set combination, or to "0-0-0", the factory default combination for Samsonite luggage. STEP 2: Locate the reset button, usually placed to the side of the combination dials. via

    What do I do if I forgot my Samsonite code?

  • Press the reset button and hold it while rotating the number dials to the desired combination.
  • Release the reset button after you set the numbers to the new combination.
  • Test the combination by turning the dials to the new code to open the lock.
  • via

    How do you set a Samsonite lock?

  • Step #1. Our combination locks are all pre-set to 0-0-0.
  • Step #2. There will likely be a little indentation on your lock where you can depress it with the end of a pen.
  • Step #3. Turn the number dials to the combination you would like to use.
  • Step #4.
  • DOES YOUR LOCK APPEAR "STUCK" OPEN AFTER FLYING?
  • via

    How do you break a 4 letter combination lock? (video)

    How many possible combinations are there in a 4 digit lock?

    There are 10,000 possible combinations that the digits 0-9 can be arranged into to form a four-digit code. via

    How do you reset a Samsonite 4 digit lock? (video)

    Leave a Comment

    Your email address will not be published. Required fields are marked *