How To Finish Baseboards

The easiest and absolute best result for painting baseboards is to remove the baseboard from the wall first. To do this, gently use a metal pry bar and slide it between the wall and baseboard and gently pry it off. Do not use the wall as leverage or you will risk damaging the drywall. The baseboard should start to pop off. via

What do you use to fill gaps in baseboards?

Caulk is used to seal any gaps wherever two surfaces meet. There are lots of types of caulk and they can be used for all kinds of purposes: creating an airtight seal around windows and doors, creating a water-proof seal around bathtubs and sinks, and filling in simple gaps around baseboards and other molding. via

How do I fill a large gap between floor and baseboard? (video)

What caulk should I use for baseboards?

While bathrooms or kitchens—the “splash zones” of the home—may require a waterproof caulk like silicone around the baseboards, most molding in the house benefits from latex caulks (sometimes referred to as “acrylic latex” or “painter's caulk”). via

How do you hide seams on baseboards? (video)

Should baseboards touch floor?

Nail the baseboard only into the wall, never the floor. Keep your nails less than 1 1/2 inches from the floor to nail into the edge of the wall sill, rather than anchoring to drywall only. via

Should there be a gap between baseboard and floor?

If you plan on installing carpet, your baseboards should be about 1 inch off the floor. This will give you enough room for the padding and the carpeting. If you are leaving the floors uncarpeted, you should not have any gaps. At most, the gap should be around the width of a quarter to prevent heavy drafts. via

Should I caulk under baseboards?

Caulk at the bottom of the baseboard reduces the risk of this happening. Gaps and cracks around baseboards give insects an easy way into your walls where they can build nests and eat away at the structure of your home unseen. Caulk on both the top and bottom edge of the baseboards closes the gaps to keep the bugs out. via

Should I caulk baseboards before I paint?

Do you caulk before or after painting? If you want professional-looking trim, apply caulk before painting. This will give you that seamless finish by the time you've washed and packed away your paint brushes! I found that if I apply caulk after painting it collects dust more and it does start to yellow over time. via

How do you caulk baseboards like a pro? (video)

What is the best paint for baseboards?

For baseboards, opt for semigloss, which is more damage-resistant and easier to keep clean. Selecting a sheen that's higher in gloss than what's on the walls has the added benefit of helping to showcase the molding. via

What angle do you join baseboards?

Using a miter box or a power miter saw, cut the baseboard at a 45-degree angle. Before nailing it in place, mark the second piece the same way, and test for fitting. Use 1-1/4" or 1-1/2" brads to close the corner. via

How do you hide trimming seams? (video)

How do you nail baseboards? (video)

Leave a Comment

Your email address will not be published. Required fields are marked *