Can You Mix Stain With Thompson Water Seal


Can you add color to Thompson Water Seal?

Thompson's WaterSeal Total All-in-One Stain and Sealer Solid | Total All-in-One Solid This unique latex & oil blend beautifies and revives the wood's appearance, while waterproofing with a film-forming barrier. Solid opacity adds he most color and shows the least amount of wood grain. via

Can I mix Thompson's Water Seal with stain?

As long as it's all oil based you should be able too. But if it's a solid color stain it might turn a little transparent if mixed with the sealer.....just give it a try on a scrap piece. Bingo. As long as they use the same solvents, it should be fine. via

Can you mix stain with water seal?

And actually, the answer is YES—you can use our EMTECH water-based sealer or top coat over the oil stain. The beauty of all our water-based sealers and topcoats is that they'll level and adhere to whatever solvent- or oil-based stain you've used. via

Can you stain wood after using Thompsons Water Seal?

Also, check the label for the recommended waiting time between deck cleaning and staining. Thompson's® WaterSeal® Waterproofing Stains can be applied to damp wood, so you only have to wait about two hours to begin applying stain. via

Is it better to seal or stain a deck?

Sealing a deck is best for cedar, teak, mahogany, or other quality woods as it enhances the wood grain and natural color. Staining a deck protects the wood from mold, mildew, moisture, and rot, and UV rays and sun damage. via

What can I put over Thompsons Water Seal?

You can only paint over Thompson's Water Seal if you wait 45 days and use a primer. This only works if you paint over concrete, but paint doesn't always stick to the Thompson's seal well. Your paint may not look as intended because Thompson's Water Seal has hydrophobic tendencies. via

How long does Thompson Water Seal last?

If applied correctly, Water Seal will last up to 4 years. This is dependent on conditions such as orientation of the wall and local climate. via

How do you apply Thompson's Water Seal? (video)

Does Thompson Water Seal darken wood?

If it beads, rolls off or stands on the surface, but does not darken the surface, it is protected. Thompson's® WaterSeal® Waterproofers and Exterior Stains penetrate the wood so that even after the beading is gone, the waterproofing protection lasts. via

Can you waterproof wood before staining?

There are three surefire ways to waterproof your wood for years to come. Use linseed or Tung oil to create a beautiful and protective hand-rubbed finish. Seal the wood with coating of polyurethane, varnish, or lacquer. Finish and waterproof wood simultaneously with a stain-sealant combo. via

How do you remove Thompson's Water Seal stain?

You can remove Thompson's Water Seal through a variety of techniques, but the simplest is probably to use Earth Smart Solutions' ESHC Hydrocarbon Cleaner and Degreaser. You also have the option to scrape or sand down the wood to remove it. via

What colors does Thompson Water Seal come in?

Available Colors

  • Acorn Brown.
  • Woodland Cedar.
  • Harvest Gold.
  • Maple Brown.
  • Sequoia Red.
  • via

    How many coats of Thompson Water Seal do I need?

    Apply 2 coats using brush,roller or sprayer. note: Use at full not dilute. The second coat should be applied when the first coat has soaked in the surface. For best results do not leave the first coat to dry for more than 1 hour before applying the second coat. via

    Should you put a sealer over stain?

    Applying a topcoat sealer is not required, but a finish protects the stained wood from scratches and keeps it from fading over time. If applying a polyurethane finish with a brush, apply one to two coats. If using a spray can, hold 8 to 12 inches from the surface and apply two or three light coats. via

    How often do you have to apply Thompson's Water Seal?

    Thompson's WaterSeal includes a complete line of deck sealers and stains for protecting deck wood from moisture and sunlight. Applying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure. via

    Leave a Comment

    Your email address will not be published. Required fields are marked *